Bevel gears production by GBS Machining Services
Bevel gears are often used to realize right angle transmissions. At GBS Machining Services you have come to the right place for a gear that guarantees optimum drive. We offer bevel gears - also called bevel gears - in various designs. Standard types and bevel gears in special custom designs.
Different bevel gears
We supply a wide range of bevel gears. We not only offer standard (normal) bevel gears and spiral teeth, but also special versions or special sizes. We can supply different gear ratio from 1: 1 to 1: 5. Depending on the gear ratio, they are available in modules 1 to module 5.
• High quality according to uni UNI 6588
• Standard and customization
• Wide range of standard sizes
• Gear ratios: 1: 1 - 1: 1.5 - 1: 2 - 1: 2.5 - 1: 3 - 1: 3.5 - 1: 4 - 1: 4.5 - 1: 5
• Module: 1 - 1.5 - 2 - 2.5 - 3 - 3.5 - 4 - 4.5 - 5
The bevel gears we supply are of course of high quality and are manufactured with a 20 ° pressure angle and produced according to UNI 6588. Both our straight and spiral bevel gears are therefore used in many sectors including: printing, agricultural sector, food industry, machine construction and Lake.
Application bevel gears
Bevel gears are often used to change the direction of rotation of a shaft. They are usually mounted on shafts that are 90 ° apart, but can also be designed to function at other angles. Because the gears themselves have an angle of less than 90 °, these gears take the shape of a cone, for this reason bevel gears are often also called bevel gears.
More information bevel gears
Our range not only contains drive components, but also various other products that are necessary to achieve an optimal process. Standard in stock are transport components, stepper motors, hydraulic components and adjustable feet. Of course our own monitoring system, the Beegle, is always available. Would you like to know more about a specific product or do you have a general question? Our specialized sales engineers are happy to help you. Feel free to contact us if you have a question or are looking for information, or open the PDF in the attachment.
Production of custom bevel gears
Bevel gears
We manufacture the following bevel gears:
• module 0.5 to module 20
• diameter of maximum 750 mm
• cone length of maximum 400 mm
Contact us for other dimensions. We investigate the feasibility of your question.
ABMI specializes in these types of bevel gears, which are manufactured by very few companies. We have various machines for its production.
Contact us for more information or for a price request!
Tailor-made bevel gears as the optimum drive component
• Mar 7, 2016
• Technology
GBS Machining Services produces high-quality drive components, structural aesthetic sheet metal and mechanical components. GBS Machining Services is an expert in devising and producing customer-specific metal components in small series, including gears where accuracy and precision are important.
Bevel gears production in any desired shape
GBS Machining Services is unique in the manufacture of gears. There are few companies in the Netherlands that produce gears, while many devices, machines or vehicles contain gears. Since 2016, GBS Machining Services has even been able to make bevel gears in any desired shape.
Bevel gear production in the Netherlands
To be able to produce different shapes and sizes of bevel gears, you need different machines, each with its own mold. “We have always outsourced this to other suppliers, but now we can do it ourselves and we can make any desired shape with one machine. So we have not purchased any special machines, but we make all the bevel gears we want on a milling machine. We always want to be able to make the right shape and size for our customers and that is how we now distinguish ourselves from the rest, ”says Jeroen van de Westerlo, technical assistant at GBS Machining Services. With bevel gears - or bevel gears - the quality of the material, the correct dimensions and the resulting wear resistance are crucial. And the more accurately a wheel is made, the less noise it produces.
From Design to Control
GBS Machining Services masters the entire process of a bevel gear from design to inspection. They design all types of bevel gears with a special computer program. They then produce the gear on a five-axis milling machine that can make all geometries in free form, in contrast to other gears that are made on special toothing machines.
Bevel gear sets
Bevel gears are often used to realize right angle transmissions. At GBS Machining Services you have come to the right place for a gear that guarantees optimum drive. We offer bevel gears - also called bevel gears - in various designs. Standard types and bevel gears in special custom designs.
Different bevel gears
We supply a wide range of bevel gears. We not only offer standard (normal) bevel gears and spiral teeth, but also special versions or special sizes. We can supply different gear ratio from 1: 1 to 1: 5. Depending on the gear ratio, they are available in modules 1 to module 5.
• High quality according to uni UNI 6588
• Standard and customization
• Wide range of standard sizes
• Gear ratios: 1: 1 - 1: 1.5 - 1: 2 - 1: 2.5 - 1: 3 - 1: 3.5 - 1: 4 - 1: 4.5 - 1: 5
• Module: 1 - 1.5 - 2 - 2.5 - 3 - 3.5 - 4 - 4.5 - 5
The bevel gear is therefore completely custom made. A company no longer has to shop for the right supplier, but can have all its conical and other types of gears produced at one address.
ESEF Trade fair
From 15 - 18 March 2016, GBS Machining Services will be present with an example of such a bevel gear at the ESEF fair in the Jaarbeurs Utrecht, the largest and most important trade fair in the Benelux in the field of supply, outsourcing, product development and engineering. You are cordially invited to visit stand no. 01.D017.
We have been producing bevel gear sets since 1950. We use machine tools from all renowned manufacturers. Think of spiral teeth according to systems such as Klingelnberg PalloÑ—d, Klingelnberg Zyklo-PalloÑ—d, Kurvex, Oerlikon and Gleason. Naturally, in addition to spiral teeth, we also make bevel gears with straight or bevel teeth.
Bierens gears are used worldwide in the most demanding applications. This is because our products meet very high quality requirements (class 1-6 according to DIN). Every day our qualified and motivated employees manufacture our cylindrical and conical gears in the air-conditioned new building of no less than 8,500 m2.
​
At GBS Machining Services you will find rotor shafts, gears with internal and external teeth and pinion and chain gears. We manufacture these according to your specifications, with both straight and helical teeth. You can contact GBS Machining Services for deliveries of bevel gears.
Requirements for the use of bevel gears
For this we use an extensive range of materials, such as steel, aluminum, various non-ferrous metals and plastics, of which we use the individual properties in accordance with the requirements of your application. In this way we guarantee that you will receive high-quality products. Bevel gears that are always tailored to your application. All essential process steps of soft and hard machining, including hardening in our own hardening ovens, are carried out in our own facilities. Thanks to this large amount of production techniques, we can also realize complex machining orders exactly according to your wishes and in the highest quality.
Rack and pinions at GBS Machining Services
GBS Machining services also produces rack and pinions in addition to gears. We can supply you with round rack and pinions, but also square rack and pinions. In all kinds of materials, such as steel and stainless steel (stainless steel). We go for a length of 4 meters. These rack and pinions are available in all conceivable material types and types of teeth, with the option of ground or hardened teeth.
In fact, you can think of rack and pinions as gears, but with a radius that doesn't stop. The rack and pinion can be used to engage a pinion with straight or bevel teeth in a rack and pinion and then make linear movements instead of rotating movements. The accuracy here depends entirely on the accuracy of the teeth.


Standard rack and pinions
A distinction is made between round rack and pinions and square rack and pinions.
For square rack and pinions, module is used to indicate the dimensions, and the material is also important. In principle, this can be made in almost any hard material, but at GBS Machining services we most often use standing and / or stainless steel. For round rack and pinions, we use a diameter to indicate the dimensions, and here too the module is important. When standard rack and pinions can be supplied up to a length of up to 4 meters. We do almost everything on request, and we can go with modules up to +/- 50.
Materials
Both round and square rack and pinions can be supplied in the following materials:
Steel rack and pinions
Stainless steel rack and pinions
Plastic rack and pinions
Steel galvanized rack and pinions
Steel nickel plated rack and pinions
Steel blackened rack and pinions
This is only part of the rack and pinions we manufacture. Please contact our specialists for more information about the types of materials we can machine for you.


Products associated with rack and pinions
With the skilled knowledge of our engineers, GBS Machining Services has already successfully tackled many projects. If you are in need, or just have a technical question about a rack and pinion, please do not hesitate to contact one of our advisers. We can always provide you with fast and professional advice that will help you. We are always ready to solve your rack and pinion and pinion challenges.
Often with gears a way of transferring forces from one to the other. This happens because the teeth of one gear mesh with the other. But with a rack and pinion, this is in principle a replacement for a normal gear.


With these drives it is quite normal for the rack and pinion to move in a longitudinal direction. The reason this exists is to change speeds and direction of the power source in, for example, a crane.


You will normally, and especially in the industry, of steel or stainless steel (SS), but these are of course the produce in any material type that is a bit hard. The only question is what is the best option for your machine, system or gearbox. This is often steel or stainless steel. In addition, a rack and pinion should normally be made of hardened, so that the inner material is tough, and the outer layer is very hard and therefore experiences little wear.


The rack and pinions and the shape of the teeth and the number of teeth affect the final product and how it works. This must be indicated very precisely and is therefore referred to as module. This is the ratio between the pitch circle diameter and the number of teeth on the rack and pinion.
Gears and rack and pinions where the module does not match, do not fit together properly and as a result you get wear very quickly on the one hand, and on the other hand the machine does not run properly. cannot interlock, so it is necessary that the gear and rack and pinion in a drive have the same module. The larger the rack and pinion module, the more forces it can transmit.


The properties of rack and pinions
A gear, conical or cylindrical, grabs grip with the rack and pinion. Because the teeth have been gripped, one can now exert force, the amount of which is determined by the module. The randomness of the position depends on the accuracy of the machining work. You can trust GBS Machining Services to machine the rack and pinion to class three accuracy. We mentioned earlier that the module is important for the forces that the teeth can bear. You can choose from a large number of types in which both pinion and rack and pinions are made of steel, stainless steel or plastic. The steel rack and pinions are almost always hardened to make the teeth last longer.


GBS Machining Services and Rack and pinion Manufacturing
GBS Machining Services machines all kinds of rack and pinions, and if necessary we can also retrofit your rack and pinion, which can be used in various machines and gearboxes. A rack and pinion and pinion is also called a rack and pinion. They are rectangular strips that have a side on which teeth are ground or milled. By using this for the gear wheel, you can create back and forth movements, instead of rotating movements. This is made possible by the use of a gear that grips into the teeth of the rack and pinion. Rack and pinions are popular parts in cranes and other machines where you want to cause straight movement.


Advantages of rack and pinions
Gear rack and pinions have a number of advantages over gears. Due to the rectangular shape it is easier to obtain high accuracy, and they can take a lot of load. If necessary and the module allows it, you can also achieve a very high speed by using rack and pinions. It is therefore not surprising that you see so many rack and pinions used in the industry.


Every rack and pinion made to measure
We can offer almost any rack and pinion, even if there is no drawing of it. We can simply reverse engineer these. The sprockets with or without hub, and the rack and pinions that we supply are produced as standard with a quality from class 12 to class 3. You can also choose the material you need. We can advise you on this, and that is not limited to the choice of materials. We can also provide advice on material treatments for your rack and pinions.

rack and pinions are available in the following sizes:
The rack and pinions we supply depend on your wishes of the highest quality you can wish for. The fact is that the rack and pinions are manufactured in such a way that the lengths are pushed against each other. We offer modules 1 to 50 as standard. If you are looking for a different type of module for your application, chances are that we can also provide you with this, both in gears and rack and pinions. Contact one of our specialists to be provided with advice without obligation.


GBS Machining Services; more than just a rack and pinion
GBS Machining Services is a specialist in the field of repair and machine work on all kinds of parts. We not only machine gear rack and pinions, but also products such as pinions, frames, engine blocks, thrusters and so on. Contact one of our experienced specialists for free advice about your project.
Bevel gears
Eliminate risks; GBS has 40 years of experience in turning workpieces. GBS embraces modern techniques, but has extensive knowledge of conventional techniques if they fall short.
Turning accurate to 1 / 100th.
